
A Kohler standby generator needs professional service once a year, even in a year when the power never went out. That’s Kohler’s own guidance, and it differs from Generac’s, which is every 200 hours or two years. So the right interval depends on the brand you own. Annual service covers the oil and filters, the battery, the fuel system, the controller, and a load test that proves the unit can actually run your house. Nationally, whole-house generator maintenance runs about $200 to $650 a year, according to HomeGuide. This guide covers how often to service a standby generator in Charlotte, what the visit includes, what it costs, and which checks you can handle yourself.
Quick starting point: If your generator is a Kohler and it hasn’t been professionally serviced in the last twelve months, it’s due. If it has never had a load test, that’s the part to ask about first.
How often does a standby generator need to be serviced?
A Kohler standby generator needs professional service at least once a year. Kohler’s generator maintenance schedule says most standby generators “should receive professional service at least once per year, even if they haven’t been used during an outage,” because idle systems still need inspection to stay ready. Generators that run for long stretches need extra service based on runtime, typically every 100 to 200 hours. Most Charlotte homes see a handful of outages a year rather than continuous running, so the annual visit is the interval that applies. If you own a Generac, its own schedule is different, and the table below shows both.
| Generator brand | What the manufacturer says | What that means for you |
|---|---|---|
| Kohler | Professional service at least once per year, even if the generator never ran during an outage | Annual service every year, regardless of runtime |
| Generac | Schedule A maintenance every 200 hours or every two years, whichever comes first | Two years if runtime stays under 200 hours |
Why you’ll hear different intervals
Generac’s support documentation defines Schedule A maintenance as every 200 hours or every two years, whichever comes first. Kohler’s guidance is annual. Both are right for their own equipment. Much of the advice you’ll find in owner forums comes from Generac owners quoting the two-year interval, which is accurate for a Generac but doesn’t carry over to a Kohler unit.
When Charlotte conditions call for more frequent service
Kohler lists conditions that can call for more frequent service, and three of them fit the Charlotte area: high-humidity environments, regions with extreme hot or cold temperatures, and “properties exposed to dust, debris, or heavy pollen.” Spring pollen coats the intake and enclosure, and summer humidity works on terminals and connections. Storm season then asks the same unit to run for hours or days. When Hurricane Helene came through in September 2024, Duke Energy reported restoring power to more than 1.1 million Carolinas customers in the first 48 hours. If you’re still deciding on a unit, our guide to whole-home generator installation in Charlotte covers sizing and cost.
What does a professional generator service include?
An annual generator service is a set of specific procedures, not a quick look at the unit. Kohler lists eight tasks for the annual visit: an oil and filter change, air filter inspection or replacement, spark plug inspection, battery testing, fuel system inspection, electrical connection checks, control panel diagnostics, and full operational load testing. Kohler’s service and maintenance page also names an automatic transfer switch evaluation, and lists load bank testing as an advanced option. Each task protects a unit that spends most of its life sitting idle, as the table shows.
| What the annual visit covers | Why it matters on a unit that sits idle |
|---|---|
| Engine oil and filter replacement | Oil ages with time, not just with run hours. |
| Air filter inspection or replacement | Pollen loads the filter even in a year with no outages. |
| Spark plug inspection | A fouled plug can mean a no-start when you need the unit. |
| Battery testing | A battery can read normal voltage and still fail under cranking load. |
| Fuel system inspection | Finds leaks and restrictions at the connection points. |
| Electrical connection checks | Confirms terminals and connections are tight and clean. |
| Control panel diagnostics | Reads stored fault codes the display may not show. |
| Full operational load testing | Confirms the unit carries real load and the transfer switch hands off. |
What does load testing check?
Load testing checks whether the generator can carry your house, not just start. A generator can start, idle, and sound healthy while still falling short under real demand. A load test confirms two things: that the engine and alternator produce rated output under load, and that the automatic transfer switch hands the house over to the generator and back. The weekly self-test doesn’t check either one. It confirms the engine starts and runs. That’s why a unit can pass its self-test every week and still struggle in the first hour of an outage, and why the load test is the item to ask about if your generator has never had one.
What does generator maintenance cost in Charlotte?
Professional maintenance on a whole-house standby generator costs about $200 to $650 a year nationally, according to HomeGuide’s 2026 cost guide. Natural gas units run $200 to $650 and propane units $200 to $600. The price depends on the generator’s size and fuel type, and on whether the visit includes a load test and transfer switch check. These are national estimates, not Andersen’s price. Andersen maintains backup generators alongside heating, cooling, and water heater systems, and our maintenance program invites members to ask what can be bundled onto their agreement. Call for your generator’s price before you book.
| Item | Cost estimate | Source |
|---|---|---|
| Whole-house generator maintenance, per year | $200 to $650 | HomeGuide, 2026 |
| Natural gas standby generator, per year | $200 to $650 | HomeGuide, 2026 |
| Propane standby generator, per year | $200 to $600 | HomeGuide, 2026 |
| Kohler maintenance kit, parts only | $81 (12 to 14 kW) to $119 (38 kW) MSRP | Kohler |
For reference, Andersen’s Preferred Maintenance Agreement for heating and cooling is $239 a year for one system (two visits at $119.50 each), and each additional system is $100 a year. A monthly option starts at $21.45 and includes no diagnostic fees on repair calls. Without a plan, a one-time HVAC tune-up is $149. Ask whether your generator can go on the same agreement, and at what price, when you call.
Can you service your own generator?
You can handle the visual checks and the oil level yourself, but Kohler recommends leaving most maintenance to a trained technician. Its guidance is that homeowners can do simple checks between visits, while “most generator maintenance should be completed by trained technicians,” and it lists warranty compliance among the reasons. Parts aren’t the expensive piece. Kohler’s maintenance kits carry an MSRP of about $81 for a 12 to 14 kW unit up to $119 for a 38 kW unit. The kit covers the oil change. It doesn’t cover battery testing, the transfer switch evaluation, controller diagnostics, or a load test. Here’s how the work splits.
| You can do this yourself | Leave this to a technician |
|---|---|
| Check the oil level, and after a long outage check it every 8 to 24 run hours | Engine oil and filter replacement |
| Keep the area around the enclosure clear of leaves, mulch, and vegetation | Battery load testing |
| Make sure airflow around the cabinet isn’t blocked | Electrical inspections and connection checks |
| Listen to the weekly self-test and note anything new | Control panel diagnostics and stored fault codes |
| Watch the status indicator and app alerts | Full operational load testing |
| Note the runtime hours after a long outage | Transfer switch evaluation |
What happens if you skip generator maintenance?
Skipped maintenance usually shows up at the worst time, during an outage. Kohler lists the risks as delayed or failed startup, extra engine wear and a shorter lifespan, fuel system problems or clogged filters, reduced electrical output, and battery failure or electrical faults. A standby generator spends most of its life waiting, which is hard on the battery. A battery can read normal voltage on a meter and still fail under the current draw of cranking, which is why the annual visit tests it under load. Enclosures that sit undisturbed can also collect leaves, pollen, and nests, and stored fault codes sit in the controller until someone reads them.
Signs your generator needs service before its next visit
Call before your annual visit if you notice any of these:
- The weekly self-test sounds different, runs rough, or has stopped happening
- A warning light, error code, or app alert you haven’t seen before
- The generator started during an outage but shut down before power came back
- Oil or fuel around the base of the unit
- The unit ran for a long stretch during a recent outage and hasn’t been serviced since
- Rodent nesting, wasp nests, or heavy debris inside or against the enclosure
- The generator didn’t start at all when the power went out
If it didn’t start during an outage, call right away rather than waiting for the scheduled visit.
Frequently Asked Questions
How much does it cost to have a generator serviced annually?
Whole-house generator maintenance costs about $200 to $650 a year nationally, according to HomeGuide’s 2026 cost guide, depending on the unit’s size and fuel type. Natural gas units run $200 to $650 and propane units $200 to $600. Andersen maintains backup generators in the Charlotte area; call (704) 596-2525 for your unit’s price and to ask about adding it to a maintenance agreement.
What type of oil should I use in a Kohler generator?
Kohler generators ship with KOHLER Genuine 5W-30 full-synthetic oil, and full synthetic is what Kohler recommends. A synthetic blend can be used. The rule to remember is not to mix types: if the oil has already been switched to conventional, Kohler says to use only conventional from then on.
Does a standby generator need maintenance if it never ran?
Yes. Kohler’s guidance specifically covers generators that haven’t run during an outage. Oil ages over time, batteries lose capacity while they sit, and idle enclosures collect pollen, debris, and pests. The annual visit checks all of that whether or not the unit ran.
What is the 20/20 rule for generators?
The phrase is used for two different things, and neither is your Kohler unit’s service schedule. Some sources use 20/20/20 as an exercise rule of thumb, roughly 20 minutes every 20 days at 20 percent load, which applies more to commercial and diesel sets. Emergency management agencies use a similar-sounding rule for portable generator safety. For a residential Kohler standby unit, the annual service interval applies, and your owner’s manual sets the self-test cycle.
Schedule generator maintenance in the Charlotte area
Andersen Heating & Cooling has served the Charlotte area since 1984, and we install Kohler standby generators and maintain backup generators alongside heating, cooling, and water heater systems. We book seven days a week, 7:30 a.m. to midnight, with no extra charge for weekend appointments. You can learn more about our generator services.
If your generator hasn’t been serviced in the last year, or you’re not sure it has ever had a load test, call us at (704) 596-2525 or request service online.


